Panasonic WV-NS324 - Manual (Page 48)

-49-
■ Host Setup
1. Click the [Host] button.
2. Host Authentication
• Select [ON] or [OFF], and click the [SET] but-
ton.
ON: Applies the host authentication.
OFF: Does not apply.
3. Host Registration
• Enter the IP address of the PC.
A hostname.domainname can be entered
when using the DNS function.
• Select an access level, and click the [SET]
button. The default setting is level 1.
1 (Administrator): Allows you to operate
setup menus and to view live and record-
ed images.
2 (Camera Control): Allows you to control
camera functions and to view live and
recorded images.
3 (Live Only): Allows you to view live and
recorded images.
4. Delete Host
• Click [DEL] button after selecting an unwanted
host name to delete it.
• Click the [Go to Main Menu] button to go back
to the main window.
Notes:
• Host host authentication is carried out first, fol-
lowed by user authentication if both are set to
ON.
• All users will become level 3 if both the host
and the user authentications are set to OFF.
• An unregistered host will be unable to access
the camera.
• Never turn around the order: start with the host
registration, and then proceed to authentica-
tion ON/OFF.
■ System Setup
1. Click the [System] button.
2. Time Adjustment
Click the [MANUAL] or [NTP] radio button and the
[SET] button.
MANUAL: No time adjustment, go to item 3 (Time
setup).
NTP (Network Time Protocol): Time adjustment is
made with your network system.
Note: The date should be set to a year before 2036
when using NTP.
The next setting window opens.
1. NTP Server Address
Enter IP address or NTP server name (host
name. domain name) within 128 characters
when using a DNS server. No default name is
registered.
2. NTP Port Number
Enter the NTP port number. The default is 123.
Retain the default under normal conditions.
3. Synchronization Interval:
Enter an Interval time (hours) between 1 and
23.
The default is 1(hour).