Philips Cineos 55PL9223 - Manual (Page 56)

56
Turning the Antenna Attenuator on or off
SOUND PICTURE
ACITVE
CONTROL
ZOOM
1 2
Channels
TV
Channel list
Channel lock
Lock after
TV ratings lock
Channels
TV
Movie ratings lock
Channel remove
Antenna attenuator Off • On
Channels
TV
Movie ratings lock
Channel remove
Antenna attenuator On • Off
1
5
2
4
Picture Sound Features Channels
TV
Settings
Demo
Install
OR
3
CH
If you live near a television station’s transmit-
ter tower, you may receive an interfering sig-
nal from the station while watching other TV
channels. Your television’s Antenna
Attenuator control is designed to reduce the
strength of such a signal in the presence of a
strong main signal. The default setting for the
Antenna Attenuator is “Off.” If you need to
use the feature, simply toggle it “On” in the
on-screen menu. The setting you make
applies to the channel you are currently
watching and will remain in place until you
change the setting.
1 Press the Menu button on the remote
control to display the on-screen menu.
2 Press the Cursor Right button repeated-
ly to select “Channels.”
3 Press the Cursor Down button repeat-
edly to select the “Antenna attenuator”
control.
4 Press the Cursor Right button to toggle
the control “On” or “Off.”
5 Press the Menu button to remove the
on-screen menu from the TV screen.