Philips Cineos 55PL9223 - Manual (Page 22)

22
P
ROGRAMMING THE
TV R
EMOTE TO
O
PERATE
A
CCESSORY
D
EVICES
SOUND PICTURE
ACITVE
CONTROL
ZOOM
1 2
2
OPEN/CLOSE
STANDBY-ON
STOP
PREV NEXT
PLAY PAUSE DVD619 DVD/CD PLAYER
POWER SELECT
GUIDE
INFO HIGH DEFINITION
POWER
3
2
The remote control supplied with your television
may also work with a variety of infrared-con-
trolled accessory devices such as cable boxes,
VCRs, amplifiers, HD satellite receivers, satellite
receivers, DVD players, and CD players.
1 Press the CBL, VCR, AMP, HD, SAT,
DVD, or CD Mode button, depending
on the type of accessory device you
want to operate. If the function but-
tons—Play, CH + or –, Stop, for exam-
ple—on the remote control work the
device, the remote is ready to use and
no further steps are required.
If the remote does not work with the
accessory device, proceed to step 2.
Using the Code Entry Method
Please look up the code(s) for your brand of
accessory device (listed on pages 24–25)
before you begin the next few steps.
2 Press the desired Mode button that cor-
responds to the type of device you
wish to operate—CBL, VCR, AMP,
HD, SAT, DVD, or CD. A green light
will indicate the mode labeled on the
top of the button, while a red light will
indicate the mode labeled on the bot-
tom of the button. If needed, hold the
button down and the light will toggle
between the green and red settings.
3 Press and hold the 1 and 3 Digit
(Number) buttons at the same time until
the Backlight and selected Mode but-
tons light up. Then release both buttons.
4 Within 30 seconds of completing step 3
and using the Digit (Number) buttons,
enter the four-digit code from pages
24–25 for your brand of device. Several
codes may be listed for your brand, so
you may need to try them all before the
remote will operate the device.
If a valid code number has been entered, the
Backlight and Mode buttons will turn off and
then blink twice. The remote control will
assign that code number to the mode selected.
Try the function buttons to see if the remote
will operate your accessory device.
If yes, no other steps are required.
If no, try the procedure again with another code
number listed by your brand. Several attempts
may be needed to complete all code numbers.
If none of the codes work, please refer to
page 23 to try the Auto Search Method.
CBL
VCR
DVD
SAT
AMP