Pioneer PRO-730HDI - Manual (Page 89)

89
V
ARIOUS FUNCTIONS
DTV CONTROL BUTTONS
Mode switch
3
8
0
-
9
1
2
5
4
6
7
CABLE, SAT and DTV cannot be selected at the same time.
When a digital tuner is connected to the monitor, set the mode
switch to CBL/SAT. The tuner can be operated with the remote
control unit if buttons 1 to - have learnt the functions (see
page 84).
1 Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
2 button
Used in channel selection.
3 CH (channel) +, – button
Press plus (+) or minus (–) to tune in a higher or lower
channel.
4 Select/Set buttons (SET/ENTER, |, \, », «)
|, \, », «: Press the button to select items on the DTV
MENU screen.
SET/ENTER: Press to activate the selected function.
5 DTV INFO button
When this button is pressed, information on DTV will be
displayed.
6 FAVORITE CH/Colored (blue, red, green and yellow)
buttons
FAVORITE CH: Used for making FAVORITE CH settings
with the digital tuner.
Blue, Red, Green, Yellow:
Used to make selections from the digital
tuner menu.
7 SOURCE POWER button
Turns the power of the DTV (digital tuner) on and off.
8 CH ENTER button
Fix the selected channel with the direct channel selection
buttons.
9 CH RETURN (channel return) button
Press to switch between the current channel and the
channel you were watching immediately before.
0 MENU button
When this button is pressed, the menu screen will be
displayed.
- DTV GUIDE button
When this button is pressed, the DTV guide screen will be
displayed.
REMOTE CODE SET UP
ARB1557A_En_081_091.P65 8/10/03, 09:30 89