Pioneer PRO-730HDI - Manual (Page 19)

19
BASIC OPERA
TIONS
CONNECTING VIDEO/AUDIO EQUIPMENT
DIGITAL INPUT jacks
This jack is used to connect devices with digital video output
(digital set top box, DVD player, etc.) compatible with HDCP.
Before attempting to connect one of these devices, read its
operating instructions to make sure that it can be connected.
(HDCP = High-bandwidth Digital Content Protection)
NOTES:
• This jack is used only for 1080i and 480p video signals.
• It is not a jack intended to be used with a personal computer.
• A separate conversion cable is required when attaching devices
with a DVI connector.
(MONO)
L
R
ANTENNA
/CABLE
A
B
CONTROL SERVICE
ONLY IN OUT
C
Y
INPUT 1
INPUT 1
INPUT 1 INPUT 2 INPUT 3
INPUT
VIDEO
INPUTS
S-VIDEO
VIDEO
AUDIO
INPUTS
INPUT 6
AUDIO
L R
OUTPUT
DIGITAL AUDIO
L
R
L
R
INPUT 5
INPUTS
DIGITAL
DVD player Digital tuner
L R
OUTPUT
AUDIO DIGITAL
AUDIO
DIGITAL
R
L
R L
MONITOR/TV OUTPUT jacks
These are used for connecting the monitor to a VCR for
recording, or for linking it to another monitor. These jacks output
the video and audio signals of the source currently selected
by the INPUT SELECT. Connect these output jacks to your VCR's
inputs. Connect the VCR's outputs to the monitor's VIDEO
inputs.
When the system connection is ON, the jack is TV OUTPUT
(refer to page 78).
ARB1557A_En_012_019.P65 8/8/03, 18:02 19