Paradyne ACCULINK 3172 - Manual (Page 7)

5
Factory default configuration options are shown in boldface type in the following tables.
Table 1. DTE Interface Configuration Options
Option Factory Comments/Description
DTE Port: Enab Enables the use of the DTE Drop/Insert port.
Disab
DTE Frame: CRC4 Selects framing format.
noCRC
DTE Coding: AMI Selects line coding format.
HDB3
Extrn DLB:
(External DTE
Loopback) Enab Allows control of DLB on external contact
closure.
Disab
Send Ones: Enab Sends all ones on channels allocated to the
network E1 on LOS, LOF, or AIS.
Disab
Table 2. Port Configuration Options (1 of 3)
Option Factory Comments/Description
Port Type: E530 Selects the port type: EIA-530A, V.35, RS449,
or X.21.
V.35
RS449
X.21
Base Rate: Nx64 Enables the port to either Nx56 or Nx64 rates.
Nx56
Net DCLB: Enab Network-initiated DCLB, allows DCLB to be
controlled by inband V.54 codes.
Disab