Paradyne ACCULINK 3172 - Manual (Page 11)

9
Table 5. Data Port Channel Configuration Options (1 of 2)
Option Factory Comments/Description
Assign To: NET Assigns this port to channels on the Network
or DTE Drop/Insert interface, or to another
port.
DTE
Prt n
Assign By: Block Determines how channels are assigned:
contiguous blocks or individual channels.
Chan
Port Rate: 64 (56)
128 (112)
192 (168)
256 (224)
320 (280)
384 (336)
448 (392)
512 (448)
576 (504)
640 (560)
704 (616)
768 (672)
832 (728)
896 (784)
960 (840)
1024 (896)
1088 (952)
1152 (1008)
1216 (1064)
1280 (1120)
1344 (1176)
1408 (1232)
1472 (1288)
1536 (1344)
1600 (1400)
1664 (1456)
1728 (1512)
1792 (1568)
1856 (1624)
1920 (1680)
1984 (1736) Selects the data rate for the port.
The possible rates depend on whether the
port is configured for Nx56 or Nx64.
This configuration option only appears if the
“Assigned By” configuration option is Block.
NOTE: Configuration options in this table are made available after Prt n (where n is 1
or 2 for the Model 3172 and 1, 2, 3, or 4 for the Model 3174) is selected from the
Channel Config screen.