Paradyne ACCULINK 3172 - Manual (Page 16)

14
Com IP Adr: Edit The IP address for the COM port when the
COM port is configured for SNMP.
Clear
Com NetMask: Edit The Subnet Mask needed to access the device
when the COM port is configured for SNMP.
Clear
Com Link: PPP The link layer protocol for the COM port when
the COM port is configured for SNMP.
SLIP
Aux IP Adr: Edit Specifies the IP address of the AUX port when
the AUX port is configured for SNMP.
Clear
Aux NetMask: Edit Specifies the Subnet Mask needed to access
the device when the AUX port is configured for
SNMP.
Clear
Def Netwk: None Specifies the default network destination.
Com
Aux
FDL
EDL n
Table 9. General SNMP Configuration Options (2 of 2)
Option Factory Comments/Description