Polycom RMX 2000 - Manual (Page 31)

Polycom RMX 2000 Getting Started Guide
2-17
RMX’s Default Conferencing Settings
The RMX is shipped with default conferencing entities, which allow RMX
users and participants to start ongoing conferences without further
configuration.
The default conferencing entities are:
Table 2-7 Conferencing Entities
Entity Description
Meeting Rooms Conferences saved on the MCU without using
resources.They are activated when the first participant
dials in.
There are four Meeting Rooms ready for use:
Name
ID
Maple_Room 1001
Oak_Room 1002
Juniper_Room 1003
Fig_Room 1004
Each Meeting Room uses the default Conference Profile
called DefaultVideo384 running at 384Kbps and has a
default duration of one hour.
Conference
Profile Name: DefaultVideo384
A Conference Profile is assigned to a Meeting Room to
define its conferencing properties.
The DefaultVideo384 Profile contains the video
conference parameters with a bit rate of 384Kbps, Auto
Layout and Polycom Skin. The Profile uses an IVR
Service called Conference IVR Service.
IVR Service Name: Conference IVR Service
The Conference IVR Service contains a set of voice
prompts in English that automates the participant’s
connection to a conference.
The IVR Service includes all the voice messages played
during the participant connection process and during the
conference.