Polycom RMX 2000 - Manual (Page 20)

Chapter 2-First Time Installation and Configuration
2-6
First Entry Configuration
There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
1
Product Registration.
2 Modifying the Factory Default Management Network Settings.
3 First-time Power-up and connection to MCU.
4 Modifying the Default IP Service Settings (Fast Configuration
Wizard).
Procedure 1: Product Registration
Before the RMX can be configured and used, it is necessary to register the
product and obtain a Product Activation Key.
During first-time power-up, a dialog box appears requesting you to enter
a Product Activation Key.
Obtain the Product Activation Key
1 Access the Support Page of the Polycom website:
www.polycom.com/support
2 In the Resource Center section, click the Register Your Product link.
3 If required, select New User Account or enter your User ID and
Password and then click Sign In.
4 Follow the on-screen instructions for Product Registration and Product
Activation. (The RMX’s serial number is on a sticker on the back of the
unit, if needed.)
5 Write down the Product Activation Key or copy/paste it for later use.
Hardware
Installation
and
Setup
Gather Network
Equipment
and
Address Info
First Entry
Configuration