Polycom RMX 2000 - Manual (Page 28)

Chapter 2-First Time Installation and Configuration
2-14
12 Click the Next button.
13 Enter the required System Flags information in the dialog box.
Table 2-5 Fast Configuration Wizard – SIP Server
Field Description
SIP Server Select Specify to enable SIP Server configuration.
When Off is selected, all SIP options are disabled.
SIP Server IP
Address Enter either the IP address of the preferred SIP
server or its host name (if a DNS server is used).
Transport Type Select the protocol that is used for signaling between
the MCU and the SIP Server or the endpoints
according to the protocol supported by the SIP
Server:
UDP – Select this option to use UDP for signaling.
TCP – Select this option to use TCP for signaling.