Polycom RMX 2000 - Manual (Page 29)

Polycom RMX 2000 Getting Started Guide
2-15
These flags can be modified later, if required, via the Setup menu’s
System Configuration option. For more details, see the RMX 2000
Administrator’s Guide, "System Configuration” on page 11-5 .
14 Click the Finish button.
Table 2-6 Fast Configuration Wizard – System Flags
Flag Description / Default
Conference ID
Length (MCU) The number of digits of the
Conference ID to be assigned
by the MCU.
Range: 2-16 (Default: 5)
Note: Selecting 2
digits limits the
number of
simultaneous ongoing
conferences to 99.
Minimum
Conference ID
Length (User) The minimum number of digits
that the user must enter when
manually assigning a numeric
ID to a conference.
Range: 2-16 (Default: 4)
Maximum
Conference ID
Length (User) The maximum number of digits
that the user can enter when
manually assigning a Numeric
ID to a conference.
Range: 2-16 (Default: 8)
MCU Display
Name The MCU name is displayed on the endpoint’s screen.
Default name: Polycom RMX 2000
Terminate
Conference when
Chairperson Exits When Yes is selected (default), the conference end
when the chairperson exits even if there are other
participants connected.
Auto Extend
Conferences When Yes is selected (default), allows conferences
running on the RMX to be automatically extended as
long as there are participants connected and there are
available resources.
The maximum extension time allowed by the MCU is 30
minutes.