Panasonic DMC-LZ7 - Manual (Page 60)

Advanced (Recording pictures)
60
VQT1C60
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
Select the mode that matches the
recording conditions and the composition.
∫ About [ ] or [ ]
• You can focus on the subject more quickly
than other AF modes.
• The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
• The AF area displayed on the centre of
the screen is bigger than usual when
using the digital zoom or when taking
pictures in dark places.
• The camera is focusing on all the AF
areas when multiple AF areas (max.
5 areas) light at the same time.
The focus position is not predetermined. It
is set to a position automatically
determined by the camera at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to [
], [ ] or [ ].
• If the AF mode is set to [ ] or [ ],
the AF area is not displayed until the
picture is brought into focus.
• Switch the AF mode to [ ] or [ ] if it
is difficult to focus using [ ].
• The AF mode cannot be set in simple
mode [ ].
[AF MODE]
Setting the focus method
5-area-focusing:
The camera focuses on
any of 5 focus areas.
This is effective when
the subject is not in the
centre of the screen.
3-area-focusing (High speed):
The camera quickly
focuses on any of
3 focus areas points –
left, right or centre.
This is effective when
the subject is not in the
centre of the screen.
1-area-focusing (High speed):
The camera quickly
focuses on the subject
in the AF area on the
centre of the screen.
1-area-focusing:
The camera focuses on
the subject in the AF
area on the centre of
the screen.
Spot-focusing:
The camera focuses on
a limited narrow area in
the screen.
MENU
SET
1/60 F4.5
VQT1C60ENG.book 60 ページ ２００７年１月１１日 木曜日 午後６時４９分