Maintenance, Carburetor water/sediment trap (600 rmk), Warning – Polaris 600 HO RMK 155 User Manual
Page 87
84
MAINTENANCE
Carburetor Water/Sediment Trap (600 RMK)
Most Polaris snowmobiles contain patented carburetor bowl water/sedi-
ment traps located at the bottom of each carburetor. The trap, consisting
of a hose with a plug, should be drained about every 1000 miles (1600
km) and inspected for contamination.
Cleaning Procedure
1. Turn the fuel valve off.
2. Place a container or shop
towels below the plug to
catch drained fuel.
3. Slide the clamp away from
the drain plug and remove
the drain plug from the sedi-
ment tube.
4. Wipe residue from the plug
and reinstall it. Reposition
and tighten the clamp.
5. Repeat the draining proce-
dure for any remaining traps.
WARNING
When draining the traps, fuel spillage will occur. Always work in a well venti-
lated area away from anything that may cause the fuel to ignite, such as open
flames, sparks, heaters, trouble lights, cigarettes, etc. Review the fuel warn-
ings on page 60.
Clamp
Drain
Plug
- 600 HO RNK 144 2011 600 RMK 144 2011 600 RMK 144 ES 2011 600 RMK 155 2011 600 RMK 155 ES 600 RMK Shift 700 RMK 155 800 RMK 155 800 RMK Shift 700 Dragon RMK 700 RMK 800 Assault RMK 600 RMK 144/155 800 Dragon RMK 155/163 600 RMK 155 Pantone 425C 800 Dragon RMK 163 800 RMK 144/155 FS IQ TOURING 7427 C 2011 Turbo IQ LXT 2009 IQ Turbo Dragon 2009 IQ Turbo Switchback IQ Turbo Dragon Turbo LX 2012 Turbo IQ IQ Turbo LX IQ Turbo Switchback FST IQ Touring FST IQ Cruiser FST IQ LX 2011 Turbo IQ 2011 Turbo IQ LX 2012 Turbo IQ LXT 2015 600 IQ LXT 2014 Turbo IQ LXT 2011 600 IQ LXT 600 IQ Touring 2010 FST IQ Touring