Polaris 600 HO RMK 155 - Manual (Page 48)

45
THE PERFECT FIT
Rear Suspension Adjustments
Shock Compression Valving
RMK Standard Rear Track Shock
The standard RMK rear track shock is an Arvin MPV Select shock that
allows for adjustments to the compression valving. Adjustments are
made by turning the adjustment screw located near the base of the
shock.
In half-turn increments, turn the screw clockwise to increase compres-
sion valving and stiffen the ride. Turn the screw counterclockwise to
reduce compression and soften the ride. There are approximately three
full turns of adjustment available.
If bottoming continues after the screw has been turned fully clockwise,
the torsion spring should be adjusted (see page 44). Return the screw to
its original starting position after the torsion spring has been adjusted.
Adjustment Screw