Maintenance, Clutch system, Caution – Polaris 600 HO RMK 155 User Manual
Page 101: Drive belt removal
98
MAINTENANCE
Clutch System
Drive Belt Removal
1. Stop the engine after operating in a forward motion.
NOTE:
For easier accessibility, make sure the clutch tool access hole is visible
between the 11:00 and 2:00 positions of the clutch sheave.
2. Turn the ignition key off.
Wait for the engine to come
to a complete stop.
3. Lock the parking brake.
4. Open the hood.
5. Remove the left side panel.
6. Locate the L-wrench in the
tool kit. Install the wrench
into the open threaded access
hole in the outer sheave of
the clutch.
7. Turn the wrench clockwise
until the sheaves open far
enough to remove the belt.
CAUTION
Do not attempt to remove the drive belt after operating in reverse. The snow-
mobile must be stopped after forward motion to prevent damage to compo-
nents during belt removal.
11:00
2:00
Access Hole
- 600 HO RNK 144 2011 600 RMK 144 2011 600 RMK 144 ES 2011 600 RMK 155 2011 600 RMK 155 ES 600 RMK Shift 700 RMK 155 800 RMK 155 800 RMK Shift 700 Dragon RMK 700 RMK 800 Assault RMK 600 RMK 144/155 800 Dragon RMK 155/163 600 RMK 155 Pantone 425C 800 Dragon RMK 163 800 RMK 144/155 FS IQ TOURING 7427 C 2011 Turbo IQ LXT 2009 IQ Turbo Dragon 2009 IQ Turbo Switchback IQ Turbo Dragon Turbo LX 2012 Turbo IQ IQ Turbo LX IQ Turbo Switchback FST IQ Touring FST IQ Cruiser FST IQ LX 2011 Turbo IQ 2011 Turbo IQ LX 2012 Turbo IQ LXT 2015 600 IQ LXT 2014 Turbo IQ LXT 2011 600 IQ LXT 600 IQ Touring 2010 FST IQ Touring