To configure quick connect settings, Tap-to-connect, To enable tap-to-connect – Palm T3 User Manual
Page 104: To make a connection with tap-to-connect
Chapter 7
Using Contacts
90
To configure Quick Connect settings:
1.
From the Quick Connect dialog box, tap Settings.
2.
(Optional) Tap the Number Prefix check box, and then enter a prefix.
For example, to dial 1 before all phone numbers, select this check box and enter
a “1” in this field. The prefix is not added to a number that begins with the “+”
character.
3.
Tap each of the pick lists and select the application you want to associate with
that task.
4.
Tap OK.
Tap-to-Connect
With Tap-to-Connect, you can select a contact and initiate a related task by tapping
it with the stylus. By default, Tap-to-Connect is not enabled.
To enable Tap-to-Connect:
1.
From the Contacts list, tap the Menu icon
.
2.
Select Option, and then select Preferences.
3.
Tap Enable Tap-to-Connect.
4.
Tap OK.
TIP
You can also configure which application opens when you tap a specific
Contacts record field, and whether to add a prefix to all phone numbers.
See
earlier in this chapter to learn how to configure these settings.
To make a connection with Tap-to-Connect:
1.
Open the contact to which you want to connect.
2.
Tap an item.
For example, to dial a phone number, tap the number you want to dial.
To address an e-mail message, tap an e-mail address.