Pella Impervia 80YW0102 - Manual (Page 12)

LOCK LEVER REMOVAL AND INSERTION
Note: You may want to remove the
lock lever if it needs to be replaced
with a different finish.
$ 8QORFNDQGRSHQWKHZLQGRZ
B. Place the lock lever in the
locked position.
C. From the exterior of the window,
look through the opening behind
the lock lever to locate the point
where the lock lever and lock cam
meet.
' ,QVHUWDQDSSUR[LPDWHO\ZLGH
flat-blade screwdriver straight into
the opening and center the blade
tip at the point the cam and lever
meet.
*OUFSJPS
#
4UPQSFNPWFEUPTIPX
UIFMFWFSBOEDBN
$
E. Push the screwdriver against the
lock cam and rotate the bottom of
the blade toward the lock lever.
This will push the lock cam away
from the lock lever hook so the
lever can be removed.
) 5HPRYHWKHORFNOHYHUE\SXOOLQJLW
straight out toward the interior of
the building.
G. To install a lock lever, from the interior hold it in the locked position and
insert into the slot until it snaps onto the cam.
Note: The lock cam must be in the locked position before the lock lever can
be inserted.
4UPQSFNPWFEUPTIPX
PSJFOUBUJPOPG
TDSFXESJWFSCFUXFFO
UIFMFWFSBOEDBN
&
*OUFSJPS
(
"8/*/(
$"4&.&/5