Panasonic CF-VDW07BH - Manual (Page 38)

38
E
No 016
Total 038
Capturing the Screen
Capture Button
If you want to playback the currently displayed screen later,
you can save the screen data onto the memory (up to 100
images)*
1 .
* 1 The number of the data that can be saved is different according
to the image.
Press Capture button.
The currently displayed screen is saved, and is added at the
end of the already-saved images.
Displaying Saved Images
Menu Button
1
Press Menu button.
2
Select [General] - [OfflineView], then
select [OK].
The saved image and the following panel will be
displayed.
Displaying the previous
image (high-speed mode)
Image number
The number of images saved
Delete the image data
Displaying the next image
(high-speed mode)
Displaying the next image
(The same operation is possible by pressing the
Capture button.)
Displaying the previous image
(The same operation is possible by pressing the R-Button.)
When the power is cut by an operation other than pressing the power switch (e.g.,
when the wireless display is running on battery and the battery is inadvertently
taken out, or when the AC adaptor is accidentally pulled out from the power outlet
and no battery is in the wireless display), all saved images are lost.
Only the screen image is displayed, and operations such as input and selection
cannot be performed on the screen.
To close an image that has been saved and display the previous screen:
1
Press Menu button.
2
Select [General] - [Connect], then select [OK].
Delete
<< >>
< >
Moving to the four cor-
ners of the screen
NOTE