Panasonic CF-VDW07BH - Manual (Page 17)

17
E
When using the serial port of the wireless display, install the driver by following steps.
Windows XP
1
Select [start] - [Control Panel] - [Printers and Other Hardware].
2
Select [Add Hardware] from [See Also], then select [Next].
3
Select [Yes, I have already connected the hardware], then select [Next].
4 Select [Add a new hardware device], then select [Next].
5 Select [Install the hardware that I manually select from a list (Advanced)], then select [Next].
6
Select [Ports (COM & LPT)], then select [Next].
7
Select [Have Disk...], then select [Browse...].
8 Select [c:\Program Files\Panasonic\WLserial\wdserial], then select [Open], and then select [OK].
9
Select [WDSP COM Port], then select [Next].
10
Select [Next], then select [Finish].
11
Restart the computer.
12 Confirm [WDSP COM Port (COMx)] is displayed under [Ports (COM & LPT)] in [De-
vice Manager].
Windows 2000
1
Select [Start] - [Settings] - [Control Panel] - [Add/Remove Hardware], then select [Next].
2 Select [Add/Troubleshoot a device], then select [Next].
3 Select [Add a new device], then select [Next].
4
Select [No, I want to select the hardware from a list], then select [Next].
5
Select [Ports (COM & LPT)], then select [Next].
6 Select [Have Disk...], then select [Browse...].
7 Select [c:\Program Files\Panasonic\WLserial\wdserial], then select [Open], and then select [OK].
8
Select [WDSP COM Port], then select [Next].
9
Select [Next], then select [Finish].
10 Restart the computer.
11 Confirm [WDSP COM Port (COMx)] is displayed under [Ports (COM & LPT)] in [De-
vice Manager].
Install the Serial Port Driver of the Wireless Display
When uninstalling the driver for the serial port of the wireless display, follow the
steps below.
Windows XP
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hard-
ware] - [Device Manager] - [Ports (COM & LPT)], right-click [WDSP COM Port
(COMx)] and then select [Uninstall].
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Add/Remove Hardware], then remove
[WDSP COM Port (COMx)] by following the on-screen instructions.
NOTE
(To next page)