Panasonic CF-VDW07BH - Manual (Page 33)

33
E
Option Menu
By selecting [Option], you can establish the individual settings for the wireless display.
General Wireless Battery Option Version
100% Excellent
OK Cancel
Default settings
Change the password that is input to
run the wireless display.
Set the resume function to [Normal
resume] or [Quick resume], then se-
lect [OK].
Normal Resume:
The wireless connection is dis-
abled during display off.
Quick Resume:
Only the screen is turned off dur-
ing display off.
If there is no input from the
touchscreen or button for a certain in-
terval of time, the display may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
Wireless Connection : Setup
Power on Password : Change
Supervisor Password : Change
Touchscreen : Calibration
LCD Off Timer : 30 min
LCD Off Mode : Normal resume
Power Off Timer : disable
Set or change the Super-
visor Password.
Change the settings of the wireless
connection in the following proce-
dure.
1
Select [Setup].
Enter the Supervisor Password,
then select [Enter].
2
Select the profile that has been set
on the following screen, then se-
lect [OK].
3
Set the network by the same pro-
cedure as
3
,
4
and
5
of “Setup
the Wireless Display” ( page
19).
Select profile.
Profile 1 Profile 2
Profile 3 Profile 4
If there is no input from the
touchscreen or button for a certain in-
terval of time, the power may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
This screen is a sample.