Panasonic CF-VDW07BH User Manual

Page 19

This screen should appear.

Set the computer’s parameters for wireless LAN functions and TCP/IP.
Set Network Type, SSID, WEP Encryption, IP Address, and NetMask according to the
above screen. (In the above settings, Network Type is shown as “AdHoc” in some cases,
while a term such as “Peer-to-Peer Group” is used here.)

Connect the wireless display to a power outlet and turn on
the wireless display. (

page 21)

Select network type.

AdHoc

Infrastructure

Cancel

Change setting on host PC to the following
value, reboot the host PC, then select
"Connect" below.

Connect Cancel

Wireless LAN card

Network Type : AdHoc

SSID : cfvdw07-17498

WEP Encryption : disable

TCP/IP

Class A

Class B

Class C

IP Address : 10. 98.185.105

NetMask : 255. 0. 0. 0

MeiWDS

AES Encryption : disable

Password : wdsp

This screen is a sample.

AES : Advanced Encryption Standard

This screen should appear.

Select [AdHoc].

Power Switch

The wireless display will turn off automatically after 10 minutes have elapsed. In
this case, start the procedure from step 2 .

NOTE

Select [Connect] on of step 4 .