Pioneer BONUSVIEW BDP-LX91 - Manual (Page 67)

67
En
07
Software updating
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT terminals. Is the connected AV receiver or amplifier compatible with DTS
Digital Surround? If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the
DIGITAL OUT terminals,
set DTS Out to DTS  PCM (page 43).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s
DIGITAL OUT terminals. The signals
are automatically converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output. Is HDMI Audio Out properly set? When listening to the sound from an HDMI OUT (MAIN)
terminal, set HDMI Audio Out to PCM (page 44).
Are Dolby Digital Out and DTS Out properly set? When listening to the sound from an DIGITAL OUT terminal,
set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 43).
Sound is fast or slow. When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables? When a Pioneer AV receiver or amplifier compatible with the
PQLS function is connected directly to the player’s
HDMI OUT
(MAIN) terminal using an HDMI cable, the PQLS function is
activated when playing an audio CD (CD-DA). Because of this,
the sound output from components other than the ones
connected by HDMI cable may be fast or slow. If this happens,
set
PQLS to Off (page 44).
After a disc is inserted,
Loading stays displayed and
playback does not start. Are there too many files recorded on the disc? When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
 is displayed in file names,
etc. The characters that cannot be displayed on this player are
displayed in
.
A message indicating low
memory (local storage)
appears while playing a
BD-ROM disc. Erase the BDMV data (page 50).
The DVD layer of BD and DVD
hybrid discs cannot be
played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to DVD (page 44).
The CD layer of BD and CD
hybrid discs cannot be
played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to CD (page 44).
The BDMV format on BD-R/
-RE discs cannot be played. To play the BDMV format on BD-R/-RE discs containing both
BDMV and BDAV formats, set
BDMV/BDAV Playback
Priority to BDMV (page 44).
Problem Check Remedy
“Connection to the software
updating server failed” is
displayed when you try to
update the software. Perform Connection Test (page 50). If “Network connection
test completed successfully.” is displayed, check the proxy
server settings (page 49). Also there may be a problem with the
Internet connection. Contact your Internet service provider.
Software updating is slow. Depending on the Internet connection and other conditions,
some time may be required to update the software.
• “WRT NG ****” is displayed
on the front panel display
during software updating.
(**** meaning any
characters)
• “WRT FAILED” is displayed
on the front panel display
during software updating.
The message is displayed when software updating has failed.
Check again whether it can be updated properly.
Problem Check Remedy