Pioneer BONUSVIEW BDP-LX91 - Manual (Page 52)

06
52
En
Eliminating extraneous noise to
play with high quality sound (Pure
Audio)
This function suppresses unnecessary signals to reduce noise and
output high quality audio signals.
The Pure Audio function includes the following modes:
• Mode 1 – Select this when listening to audio CDs and audio
files. This mode also provides higher quality sound than
Mode
2 when playing only the audio portion of such video sources as
BDs, DVDs and video files.
• Mode 2 – Select this when also viewing the video portion of
such video sources as BDs, DVDs and video files.
• Off – Select this to disable the Pure Audio function.
Caution
• When Mode 1 or Mode 2 is set, the operation is as described
below.
– When Mode 1 is set, only audio signals are output during
playback (except when an operation is being performed and
the disc menus are being displayed).
– Video signals are only output from the output terminal
selected with VIDEO SELECT (page 24).
– Audio signals are only output from the output terminal set at
Output Terminal (page 43).
– The player’s front panel display turns off during playback
(except when an operation is being performed and the disc
menus are being displayed).
– The PURE AUDIO indicator on the player’s front panel lights.
 Switching the Pure Audio Mode
 Press PURE AUDIO on the front panel.
The currently set Pure Audio mode is indicated on the player’s front
panel display.
The Pure Audio mode changes each time the button is pressed.
Note
• The Pure Audio mode cannot be changed during playback.
Restoring all the settings to the
factory default settings
1 Check that the player’s power is turned on.
2 When a disc is playing, press  to stop playback.
Eject the disc from the player.
3 While pressing , press  STANDBY/ON.
Operate using the buttons on the player’s front panel.
Note
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 20).
• When all the settings are restored to the factory defaults, all the
data for the secondary video (Picture-in-Picture), secondary
audio, bookmarks, etc., is erased.
“PURE MODE1” “PURE MODE2” “PURE OFF”