Pioneer BONUSVIEW BDP-LX91 - Manual (Page 16)

02
16
En
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting the cable.
• Placing a load on the plug could result in faulty contact and no
video signals being output.
• To use the KURO LINK function, connect the AV receiver or
amplifier to the HDMI OUT (MAIN) terminal. The KURO LINK
function will not work if connected to the HDMI OUT (SUB)
terminal.
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. Be sure to connect the AV receiver or amplifier to
the
HDMI OUT (MAIN) terminal.
Note
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 53).
• See Stretching widescreen pictures vertically (Anamorphic Zoom)
on page 51 for instructions on viewing 2.35:1 movies with a front
projector equipped with an anamorphic lens.
 Achieving better sound quality
When connecting one TV (or projector) and AV amplifier to the
player, connect in such a way that the video and audio signals are
transferred separately in order to achieve higher quality sound.
Note
• Using the Pure Audio function provides high quality sound with
extraneous noise eliminated (page 52).
R
VIDEO OUT
HDMI OUT
RS-232 C
DIGITAL OUT LAN(100) CONTROL IN
L R L R L
Y P B P R
FRONT
OPTICAL COAXIAL
COMPONENT VIDEO
SURROUND CENTER
VIDEO S-VIDEO
MAIN(KURO LINK) SUB
SUB WOOFER SURROUND BACK AUDIO OUT ( 7.1 ch )
HDMI OUT
P R MAIN(KURO LINK) SUB
Player’s rear panel
To HDMI input terminal
From HDMI output terminal
AV receiver
or amplifier
HD
MI
c
a
b
le
(com
merc
ially
avail
a
b
le)
To HDMI input terminal
TV
HDM
I c
a
b
le
(inc
luded)
Match the direction of
the plug to the terminal
and insert straight.
Direction of
signal flow
HD
MI
c
a
bl
e
(c
omme
rcia
lly
av
ailable)
Projector
To HDMI input
terminal
R
VIDEO OUT
HDMI OUT
RS-232 C
DIGITAL OUT LAN(100) CONTROL IN
L R L R L
Y P B P R
FRONT
OPTICAL COAXIAL
COMPONENT VIDEO
SURROUND CENTER
VIDEO S-VIDEO
MAIN(KURO LINK) SUB
SUB WOOFER SURROUND BACK AUDIO OUT ( 7.1 ch )
HDMI OUT
P R MAIN(KURO LINK) SUB
Player’s rear panel
To HDMI input
terminal
AV receiver
or amplifier
HD
MI
c
a
bl
e
(in
c
lu
de
d) Match the direction of
the plug to the terminal
and insert straight.
Direction of
signal flow
HDM
I c
a
b
le
(comm
e
rc
ially
availa
b
le
)
TV or
projector
To HDMI input
terminal
Do not connect using
an HDMI cable.