Bosch BSN1 - Manual (Page 12)

7
de
Suction
Illustration 9
Setting the floor nozzle:
Ⅲ fitted carpets and carpets
Ł
Ⅲ smooth floors
Ł
Illustration 10*
Vacuuming with accessories
(insert the grip or the suction pipe, depending
on requirements).
a) Corner nozzle
To vacuum in corners and joins.
b) Upholstery nozzle
To vacuum upholstered furniture, curtains,
mattresses etc..
c) Furniture brush
To vacuum window frames, cupboards,
sections etc..
Illustration 11
When taking brief vacuuming pauses, you can
use the parking aid on the back of the
appliance. Push the hook on the floor nozzle
in to the recess on the back of the appliance.
Illustrations 12 + 13
When vacuuming, e.g. stairs, the appliance
can also be carried using the two grips.
After work
Illustration 14
Pull out the mains plug.
Pull briefly on the mains cable and then let go
(the cable rolls up automatically).
Illustration 15
To store / transport the appliance, you can
use the storing aid on the underside of the
appliance. Stand the appliance up straight.
Push the hook on the floor nozzle in to the
recess on the underside of the appliance.
Changing the filter
Replace the dust bag
Illustration 16
The filter change display on the lid turns
yellow.
Illustration 17 + 18
Open the lid and take it off by moving the
locking lever in the direction of the arrow.
Illustration 19
Close and remove the dust bag by pulling on
the cover clip.
Please fold out the picture page
Before using for the first time
Illustration 1*
Push the handle onto the flexible tube and
until it engages.
Starting up
Illustration 2
a) Position the suction hose with the direction
arrow pointing upwards - lock in to the
suction opening.
b) When removing the suction hose, press
together both latches and pull out the hose.
Illustration 3
Fit together the grip and the suction pipe.
Illustration 4
Fit together the floor nozzle and the suction
pipe.
Illustration 5*
a) Fit together the suction pipe.
b) by moving the adjusting head to the
direction of the arrow, releasing the telescopic
pipe and setting to the required length.
Illustration 6
Take the mains cable by the plug and pull out
the desired length and then plug in to the
mains socket.
Illustration 7
Switch on / off the vacuum cleaner by
pressing the on / off button in the direction of
the arrow.
Illustration 8
Set the level of suction by turning the on / off
button in the direction of the arrow.
* Depending on version
en
Innenteil 194 443 B 19.10.2006 16:51 Uhr Seite 7