Petsafe IN-GROUND FENCE PIG00-10773 - Manual (Page 25)

www.petsafe.net 25
Steps:
1. Begin by walking your pet on a leash in the Pet Area. Calmly praise and
talk to your pet.
2. Move toward the Boundary Flags (10A). Keep your mood happy.
3. With full control of your pet on a leash, walk to the flags. As your pet enters the
Static Correction Zone, the Receiver Collar will begin to beep (10B). Allow your
pet to stay in the Static Correction Zone for up to 2 seconds then gently help
him back into the Pet Area (10C). Immediately praise and offer your pet a treat
as he enters the Pet Area, even if you have helped with the leash.
4. Repeat this process at the same Boundary Flag until your pet resists going into
the Static Correction Zone.
5. Aim to master 3-4 Boundary Flags per session. Make this FUN! Praise if
your pet quickly retreats or resists going into the Static Correction Zone.
10A 10C 10B
Days 2 thru 4 - Continue Boundary
Awareness
Perform three training sessions per day, each lasting 10-15 minutes.
Goal:
To train your pet to stay in the Pet Area and respect the boundary.
Setup:
• Program the Static Correction Level on the Receiver Collar to Level 2.
• Put a separate non-metallic collar on your pet’s neck ABOVE the Receiver
Collar and attach a leash.
Be sure the extra collar does not put pressure on the
Contact Points.
• Have tiny pieces of treats available (hot dogs or lunch meat work well).
• Have your pet’s favorite play toy available.
Steps:
1. Repeat steps 1-5 in Phase One.
2. If your pet does not respond to the Static Correction, confirm that the
Receiver Collar is fitting properly according to Step 9 on page 22.
3. If the Receiver Collar is fitted properly and your pet does not respond to the
Static Correction, increase the Static Correction Level by 1. Watch for slight
reactions at first such as ears up, head turned, looking at the ground.
4. Stay at the same flag until your pet resists going into the Static
Correction Zone.
Phase
2