Via the cli, Via the web interface – Polycom A800 User Manual
Page 7
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
7
Via the CLI
By default, only SSH (Secure Shell) access to the switch (mobility
controller) is permitted.
1. From a management system that has network connectivity to the
switch, connect to the switch using SSH:
ssh admin@<switch IP address>
2. Enter the admin password at the password prompt.
3. Type
enable
at the > prompt to enter the enable mode.
4. Type the enable password when prompted for a password.
Via the Web interface
Once the connectivity to the switch is verified, open a Web browser
and enter the switch’s IP address in the navigator bar.
The switch can be accessed using http at http://
or https at https://
The user is prompted with the username and password configured (in
the example above, the
username
/
password
configured is
admin
/
admin
). On successful login the following
Network Summary
screen is displayed: