Polycom A800 - Manual (Page 16)

Configuration Guide
PN: 1725-36080-001_J.doc 16
CLI Commands Required Settings Default
Settings Description
802.11b/g Tx rates (if
all wireless client are
802.11g) These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 1,2,5,11
802.11a rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 6,9,12,24
802.11a Tx rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 6,9,12,18,24,
36,48,54 The supported Tx rates for
802.11a.
ESSID Aruba This is the ESSID that the voice
devices would associate with.
Short preamble Tested: Enable
Recommended: Disable Enable Set the short preamble to
disable, to enable long-
preamble-only support.