Polycom A800 - Manual (Page 15)

Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc 15
For additional details on RF deployment please see the Deploying
Enterprise-Grade Wi-Fi Telephony white paper and the Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones
.
Recommended AP configuration settings
CLI Commands Required Settings Default
Settings Description
Max-clients 40 0 Max clients that can associate
with the AP.
Beacon-interval Set to default 100
milliseconds The interval at which beacons
are sent out .
dtim-period 3 1 Delivery Traffic Indication
Message interval in terms of
beacon interval.
hide-essid disable> Enable Disable To disable the ESSID from
being broadcasted.
Max-retries 2 4 Maximum number of times the
AP tries to send a packet to the
client before discarding the
packet.
b/g-mode Mixed Mixed The radio mode of the b/g
radio.
Tx-power <0-4> 0 As per the environment. This
need not be set if ARM is
enabled.
Channel 1 This is the channel assigned to
the radio. Need not be set if
ARM is enabled.
802.11b/g rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 5,11
802.11b/g Tx rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 1,2,5,11 The supported Tx rates for
802.11b/g.
802.11b/g rates (if all
wireless client are
802.11g) These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates. 5,11