Connecting aps, Provisioning aps – Polycom A800 User Manual
Page 11
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
11
Connecting APs
Provisioning APs
The APs need to be provisioned. The Aruba APs can be provisioned
manually or be configured for automatic provisioning. For manual
provisioning, use the Web-based AP provisioning Web page. Refer to
the AP Provisioning User Guide for instructions on provisioning the
AP.
The APs can communicate with the controller over a L2 or L3
network. The only requirement is that each AP be assigned an IP
address and default gateway using DHCP.