Cli command configuration, Web-based configuration – Polycom A800 User Manual
Page 17
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
17
CLI command configuration
All of the commands listed in the CLI Commands column above must
be entered under the
ap location
command.
The format is:
ap location x.y.z
phy-type g (To make the changes for the “g” radio.)
commands
!
phy-type a (To make the changes for the “a” radio.)
commands
!
Web-based configuration
1. Click the
Configuration
button.
2. In the navigation pane, select
Radio
from the
WLAN
sub-menu.
3. Click the
802.11b/g
tab.
4. For
Max Retries
, enter
2
for voice.
5. Select the
Short Preamble
check box.
6. For the
DTIM
period
, enter
3
.
7. For
Basic Rates
and
Supported Rates,
consult the facility’s RF site
survey to determine if coverage is sufficient to support all data
rates.
8. To assign the power and channel setting manually:
a. For
ARM Assignment
, select
Disabled.
b. Clear the
ARM Scanning
check box.
c. Set the
Default Channel
and
Initial Transmit Power
from their drop-
down lists.
d. For
Mode
, click the
Access-point
option.
9. Click the
Apply
button.