Cli commands to verify setup for subnet routing – Polycom A800 User Manual
Page 29
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
29
It’s also necessary to set the default gateway of the SpectraLink 8000
SVP Server and SpectraLink 8000 Telephony Gateway to the IP
address of the router connected to the master switch.
CLI Commands to Verify Setup for Subnet Routing
From the Aruba 800
show master ip
(should be 800’s ip)
show stm connectivity
(shows the APs connected to
the Aruba 800 switch)
Ping the local switch.
Pings should be successful.
From the Aruba 6000
show master ip
(should be 800’s ip)
show stm connectivity
(shows the APs connected to
the Aruba 6000 switch)
show running configuration (shows the AP & aaa rules are
carried from the master to
the slave)