Panasonic KX-MC6020 - Manual (Page 23)

2. Preparation
23 For assistance, please visit http://www.panasonic.com/help
2.10 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
1
{ Menu} i {#}{1}{0}{3} i {Set}
NO.= |
2 Enter your fax number, up to 20 digits.
L To enter a “
+”, press {*}.
L To enter a space, press {#}.
L To enter a hyphen, press {Flash}.
L To erase a number, press {Stop}.
3
{ Set}
4 Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
L To erase all numbers, press and hold {Stop}.
2.11 Configuring the unit to
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
2.11.1 Setting up automatically with a
DHCP server
Your situation:
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1 After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
L The IP address, subnet mask, and default
gateway will be set automatically.
2 Install Multi-Function Station on the computer that
you want to use it with. See page 24 for details.
Note:
L You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
2.11.2 Setting up manually
Your situation:
–
When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
1
{ Menu}
2 Press {#}{5}{0}{0} to display “ DHCP”.
3 Press {0} to select “ DISABLED”. i {Set}
4 Set each item.
For the IP address:
1. Press {5}{0}{1} to display “ IP ADDRESS”.
2. {Set} i Enter the IP address of the unit. i
{ Set}
For the subnet mask:
1. Press {5}{0}{2} to display “ SUBNET MASK”.
2. {Set} i Enter the subnet mask of the network.
i {Set}
{ Set} {<}{>} { Stop}
{ Menu} { Flash}