PACKARD BELL MH4000 - Manual (Page 68)

4-16
Configuring Your System
Table 4-5. BIOS Setup Configurations (Continued)
MENU PARAMETER NAME NORMAL SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
SECURITY MENU
Supervisor Password is Disabled
User Password is Disabled
*Set Supervisor Password Press ENTER.
Set User Password Press ENTER.
**Password on boot Disabled
**Diskette Write Normal
**Diskette access Everyone
System backup reminder Disabled
Virus check reminder Disabled
Power Switch Mask Unmasked
SERVER MENU
Thermal Sensor
Press ENTER for menu.
Thermal Sensor Enabled
Upper Limit 50
Lower Limit 10
ESM ASIC Interrupt IRQ 13
SMI Enabled
Event Log Initialization Disabled
Console Redirect Port Disabled
* Enabling supervisor password requires a password for entering SETUP.
** These parameters require prior setting of supervisor password.