PACKARD BELL MH4000 - Manual (Page 10)

1-1
Introduction
This guide tells you how to configure and upgrade your
server. Its goal is to familiarize you with your server
and the tasks necessary for system configuration and
upgrading.
Organization
Chapter 1
Introduction

Introduces you to the purpose and
structure of this guide.
Chapter 2
Features

Gives you an overview of the server and
describes major system components.
Chapter 3
Setup

Tells you how to select a site, unpack the
system, get familiar with the system, make cable
connections, and power on the system.
Chapter 4
Configuring Your System

Tells you how to configure
the system and provides instructions for running the
System Configuration Utility (SCU), the BIOS Setup
Utility and the SCSISelect Utility. This chapter also
tells you how to configure function select switches and
system board jumpers in order to set specific operating
parameters.
Chapter 5
Upgrades and Options

Provides you with
instructions for upgrading your system with optional
processor, memory, options cards, and peripheral
devices.
Chapter 6
Problem Solving

Contains helpful information for
solving problems that might occur with your system.