Planar PR Line PR3020 - Manual (Page 32)

User’s Manual
– 24 –
Function RGB DVI Component Video Composite Video S-video
Reset x x x x x
x = available to video source
Advance Feature
Press the Menu button to open the OSD menu. Press
to move to the Setup menu. Press to
move to the Advance Feature menu and then press Enter or . Press
to move up and down in
the Advance Feature menu. Press to change values for settings, and then press Enter or to
confirm the new setting.
I TEM D ESCRIPTION D EFAULT
User Color This feature adjusts the color balance in each color of RGB (red, green,
blue), and their neutral colors (cyan, magenta, yellow, white) by using
color correction adjustment. Increasing a color’s setting heightens the in-
tensity of that color on the screen, while a lower setting makes the color
less intense.
Press to select a color.
Press to adjust the selected color. (Range: 0 – 100)
80
White
Peaking White Peaking increases the output in the brightest whites without chang-
ing the blacks and dark grays. It crushes the whites slightly, but it does
not appear to clip them or seriously obscure white detail. If you prefer a
stronger image, adjust toward the maximum setting. For a smoother,
more natural image, adjust toward the minimum setting.
Press to adjust the value of white peaking. (Range: 0 – 10)
Data source:
10
Video source:
2
Logo
Display Press
to enable or disable if the logo displays when the projector
starts, and when no source is detected. (Range: On – Off)
On
Fan Speed Press the cursor button to toggle between normal and high fan speed
Set Fan Speed to High in altitudes over 1500 meters (5000 feet).
Normal