Planar PR Line PR3020 - Manual (Page 23)

DLP® Projector – User’s Manual
Setting an Access Password (Security Lock)
You can use the cursor (arrow) buttons to set a password and prevent unauthorized use of the pro-
jector. When enabled, the password must be entered after you power on the projector. (See
“Navigating the OSD” on page 18 and “Setting the OSD Language” on page 19 for help on using
OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
1.
Press the Menu button to open the OSD
menu.
2.
Press the cursor button to move to the
Setup menu.
3.
Press the cursor button to select Ad-
vance Feature and press Enter or .
4.
Press the cursor button to select Secu-
rity Lock.
5.
Press the cursor Enter or button to se-
lect Enable. (White text is selected.)
A password dialog box automatically ap-
pears.
6.
You can only use the following four
cursor buttons:
in the password fields. You can use any
combination including the same arrow five
times, but not less than six.
Press the cursor buttons in any order to set
the password. When you confirm the
password, OK appears.
Every time you start the projector, a
password dialog box appears.
Enter the password in the order you set it
at step 6. (Press the Menu button to cancel
if you enter the wrong password.)
– 15 –