Philips PREMIERE DCR 2021 - Manual (Page 9)

56
EN
1.1 Front panel
1 Smart Card slot:
. . . . . . . . . . . . . . . . . . . . . . .
see chapter Inserting your Smartcard
2 I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
channel -
3 U
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
channel +
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
remote control receiver window
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ON/ Low Power/Reset (5 second key press)
The front panel button includes a colour LED indicating the receiver status.The
LED blinks at remote control command reception.
STATUS INDICATOR TABLE
If you have put your receiver in “standby” and the LED is blinking red, it indicates that
an upgrade of your receiver is taking place. Do not interrupt this operation.Wait for
the LED to blink green, indicating successful download.You can then continue as normal.
When your receiver is in low power mode, software functions are no longer
supported.Therefore EPG data may not be up-to-date when waking-up from
low power (see paragraph 6.8).
Indicator LED
Mode
Low power
red
Standby orange
TV/Radio mode green
Timer active in running mode Dimmed green
Timer active in standby Dimmed orange
Download in progress Blinking red
1 Product description
Q W E R T
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 56