Philips PREMIERE DCR 2021 - Manual (Page 34)

81
EN
4 Enter your new password again to confirm.
5 Press EXIT.
10.5 Advanced settings
The Settings sub menu menu includes the following items:
o TV Settings
o System Settings
o Country & Time Settings
o Factory settings
o Decoder Status
10.5.1 TV Settings
This screen is used to set aspect ratio settings.
1 Select values for the following:
• TV screen format: default setting is 4:3. If you
have a 16:9 screen TV, change this setting to 16:9
for optimal viewing.
• Display format: set the way the video is
transformed in case the broadcast aspect ratio is
1
6:9 your TV aspect ratio is 4:3.
2 Press OK to confirm.
10.5.2 System Settings
This screen is used to set your receiver audio/video
output settings.
1 Select values for the following:
• TV/VCR SCART Output: select the SCART
output format supported by your TV set and VCR
(refer to your TV and VCR user manual for more
information)
• Dolby Digital: select Yes to enable Dolby Digital
sound
If you enable Dolby Digital sound, make sure you
use the digital audio output (no signal on the
analogue outputs).
• Video/DVD Recorder Control: select the
recording control feature your recorder supports
(refer to your recorder user manual for more
information)
Aspect TV screen format = 4:3
Display ratio broadcast format = 16:9
format
LetterBox
full picture with black bars at the
top and bottom
Centre Cut Out picture cut-out on the left and right
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 81