Philips PREMIERE DCR 2021 - Manual (Page 14)

61
EN
- Connect the “RF In” socket of your Digital-Receiver to the cable wall socket using
the RF coaxial cable supplied.
- Connect the “TV” SCART socket of your Digital-Receiver to the RGB capable
SCART socket of your TV using the SCART lead supplied with your Digital-
Receiver.
This connection also applies if your VCR has two SCART sockets.
With this connection set up, you can:
• Watch digital TV while you record analogue TV.
• Record the digital TV channel you are watching.
• Watch play-back from your VCR.
4.2 Connecting to your audio equipment
(analogue or digital)
Depending on your audio equipment, you might have several options to connect your
Digital-Receiver.
ANALOGUE CONNECTION (A)
Connect the L/R audio output sockets to the relevant L/R audio input sockets of your
audio equipment using a double CINCH cable (not supplied). Consult the user manual
of your audio equipment to locate the proper analogue audio inputs.
With this connection set up you can control the volume (up/down and mute) using
either your Digital-Receiver or audio equipment remote control.
AB
LR
AUDIO
Digital
input
Analogue
input
Audio equipment
to AC outlet
Cable Receiver
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 61