Panasonic KX-MB772CX - Manual (Page 67)

11. Help
67
“ NO FAX REPLY” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ OUT OF PAPER INPUT TRAY
#2”
L Recording paper is not installed in the manual input tray. Install paper (page
27).
“ PAPER JAMMED”
“ OPEN TOP COVER”
L A recording paper jam occurred. Remove the jammed paper (page 73).
“ PC FAIL OR BUSY” L The cable or the computer power cord is not connected correctly. Check the
connections (page 17, 23).
L The software is not running on the computer. Restart the software and try
again.
“ PLEASE WAIT” L The unit is warming up. Wait for a while.
“ POLLING ERROR” L The other party’s fax machine does not offer the polling function. Check with
the other party.
“ REDIAL TIME OUT” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ REMOVE DOCUMENT” L The document is jammed. Remove the jammed document (page 78).
L Attempted to send or copy a document longer than 600 mm using the auto
document feeder. Press {STOP} to remove the document. Divide the
document into two or more sheets and try again.
“ REMOVE PAPER IN INPUT
TRAY #2”
L The recording paper is installed in the manual input tray when trying to copy,
receive faxes or print reports. Remove the recording paper from manual
input tray.
“ REPLACE DRUM CHANGE
SUPPLIES”
L The drum unit’s service life is finished. Replace the drum unit immediately.
“ RX MEMORY FULL” L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 73).
L If feature #442 is set to “ ALWAYS” (page 60), check the connection between
the computer and the unit.
“ TONER EMPTY”
“ CHANGE SUPPLIES”
L The toner’s service life is finished. Replace the toner cartridge immediately.
“ TONER LOW”
“ CHANGE SUPPLIES”
L The toner’s service life is near to an end. Replace the toner cartridge as
soon as possible.
“ TOP COVER OPEN” L The top cover is open. Close it.
“ TRANSMIT ERROR” L A transmission error occurred. Try again.
“ WARMING UP” L The inside of the unit is cold. Let the unit warm up. Wait for a while.
“ WRONG PAPER” L The fax message was printed on paper which is shorter than A4 size paper.
Use the appropriate size paper (page 84).
Display Cause & Solution