Panasonic KX-MB772CX - Manual (Page 54)

9. Programmable Features
54
9.2 Basic features
Feature/Code Selection
Setting the date and time
{#}{
1}{0}{1}
(KX-MB772 only)
Enter the date and time using the dial keypad. See page 21 for details.
Setting your logo
{#}{
1}{0}{2}
(KX-MB772 only)
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
{#}{
1}{0}{3}
(KX-MB772 only)
Enter your fax number using the dial keypad. See page 22 for details.
Setting the location where
you use
{#}{
1}{1}{4}
(KX-MB772 only)
This setting must match your location.
{
1} “ MIDDLE EAST” (default): To use in Middle East.
{ 2} “ HONG KONG”: To use in Hong Kong.
{ 3} “ MALAYSIA”: To use in Malaysia.
{ 4} “ ASIA”: To use in Asia.
{ 5} “ NEW ZEALAND”: To use in New Zealand.
{ 6} “ AFRICA”: To use in Africa.
{ 7} “ LAT.AMERICA”: To use in Latin America.
Setting the dialling mode
{#}{
1}{2}{0}
(KX-MB772 only)
{ 1} “ PULSE”
{ 2} “ TONE” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 18 for details.
Setting recall/flash time
{#}{
1}{2}{1}
(KX-MB772 only)
The recall/flash time depends on your telephone exchange or host PBX.
{
0} “ 900ms”
{ 1} “ 700ms”
{ 2} “ 600ms”
{ 3} “ 400ms”
{ 4} “ 300ms”
{ 5} “ 250ms”
{ 6} “ 200ms”
{ 7} “ 160ms”
{ 8} “ 110ms”
{ 9} “ 100ms”
{*} “ 90ms”
{#} “ 80ms”
Note:
L The default may vary depending on feature #114 setting.
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
{#}{
1}{4}{5}
{ 1} “ NORMAL” (default)
{ 2} “ DARKER”