Panasonic KX-MB772CX - Manual (Page 61)

9. Programmable Features
61
9.4 Copy features
9.5 PC print features
Feature/Code Selection
Changing the default copy
resolution
{#}{
4}{6}{1}
To change the default resolution setting for copying.
{
1} “ TEXT/PHOTO”: For documents containing both text and photographs.
{ 2} “ TEXT” (default): For documents containing only text.
{ 3} “ PHOTO”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{
4}{6}{7}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Holding the previous zoom
(enlargement / reduction)
setting
{#}{
4}{6}{8}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
4}{6}{9}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Feature/Code Selection
Changing the data timeout
setting
{#}{
7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {MENU} i {#}{7}{7}{4} i {SET}
2. Enter the desired data timeout setting from “ 005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “ 060” seconds.
3. {SET} i {MENU}