Panasonic KX-MB772CX - Manual (Page 59)

9. Programmable Features
59
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
4}{3}{1}
{ 1} “ A”
{ 2} “ B”
{ 3} “ C”
{ 4} “ D”
{ 5} “ B-D” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 52 for details.
Setting auto reduction
feature
{#}{
4}{3}{2}
To receive a fax document that is longer than your recording paper.
{
0} “ OFF”: The unit will print the original size.
{ 1} “ ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{ 0} “ OFF”
{ 1} “ ON” (default)
1. {MENU} i {#}{4}{3}{4}
2. Press {1} to select “ ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “; #9”.
L Do not enter “0000”.
4. {SET} i {MENU}
Note:
L If feature #114 is set to “ HONG KONG”, the default fax activation code is
“;;; 9”.
Changing the silent fax
recognition ring setting
{#}{
4}{3}{6}
To change the number of times the unit rings while in TEL/FAX mode.
{
3} “ 3” (default)
{ 4} “ 4”
{ 5} “ 5”
{ 6} “ 6”
{ 7} “ 7”
{ 8} “ 8”
{ 9} “ 9”
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 44 for details.
Setting the memory reception
alert
{#}{
4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Feature/Code Selection