Panasonic EB-X700 - Manual (Page 23)

20
HANDSFREE TALKING
To hear the caller’s voice from the handsfree loudspeaker, press
Loudsp.. Set the phone down nearby so you and several others
can have a conversation without holding the phone.
To go back to the earpiece, select Handset.
If you have activated a Bluetooth ® handsfree headset, press
Options and select BT Accessory to hear the caller’s voice in
the Bluetooth
® headset.
Volume Control
Scroll or to increase or decrease volume of phone earpiece
, phone loudspeaker , or if a headset is attached. Note the
volume step bars change as you adjust volume.
To mute or unmute the microphone, press Options and select
Mute or Unmute. Mute switches off the phone’s microphone and
any accessory microphones if attached. Unmute switches
microphone back on.
CALL WAITING
If you activated Call waiting network service in Call Settings (see
page 117), you can answer an incoming call when on an active
call.
1. During an active call, press
to answer an incoming call.
The active call is put on hold.
• To switch between the calls, press Swap or
.
• To end the currently active call and answer the incoming
call, press Replace.
2. To end the currently active call, press . The held call
becomes active.
• Or to end both calls at once, press Options and select End
all calls.
Loudspeaker icon - handsfree is active.
Earpiece icon - handsfree is not active.