9 config > management > remote syslog, 10 config > services > ntp-client – Planet Technology Network Device MAP-2105 User Manual

Page 61

4.3.9 Config > Management > Remote Syslog

This submenu is used to set the remote syslog server IP Address, who is receiving the syslog

message from the MAP-2105.

Remote Server

Specifies the IP Address of the syslog server at the column provided. In order to disable

this feature, please leave the column empty and click the OK button

4.3.10 Config > Services > NTP-Client

The NTP is a protocol that used to synchronize the clocks of computers to some time reference.

In this case it is used to synchronize the time of different nodes

Parameters at this page:

Enable NTP-Client

Enable of disable the NTP-client feature