Planet Technology Network Device MAP-2105 - Manual (Page 20)

Static Routing Entry contains the following parameters:
Subnet
Enter a subnet IP address.
Netmask
Enter a netmask of the subnet IP address above.
Gateway
Select either gateway or device so that the traffic is through this selection. Please
enter IP address for gateway selection.
Device
Select either WAN or VPN from the drop down list. All the traffic from the
specified subnet will be routed to this selected device.
Comment
Optional comment can be added into this field.
Status
Choose enable to activate this entry, disable to deactivate this entry.
“Apply” button
Press this button to save the settings.
back
Link back to previous page.
“Edit” Button
Press this button to edit the selected entry under the Routing Table. A page similar to “Static
Routing Entry” will be presented. However, it provides one extra button which is the “Delete”
button. Use this button to delete the selected entry.
15