Planet Technology Network Device MAP-2105 - Manual (Page 27)

Enable or disable SNMP trap for this device.
Trap Community
Enter the trap server community.
Destination
Enter the IP address of the trap server.
Authentication failures
Check or uncheck the checkbox to enable or disable sending of traps when
authentication failures occur.
“Apply” button
Press this button to save new settings.
3.4.3 Syslog Server
Remote-Syslog contains the following parameters:
Status
Display the current state of the remote-syslog server
Host to send syslog (leave empty to disable)
Enter a hostname or IP address of the syslog server. Leave this field empty if no remote
logging required.
“Save Config” button
Press this button to save new settings.
“Use Default” button
22