6 reboot, 7 reset, 8 status – Planet Technology Network Device MAP-2105 User Manual

Page 33: 6 reboot 3.7 reset 3.8 status

Press this button to save new settings.

“Use Default” button

Press this button to restore the factory default configuration for this page.

3.6 Reboot

Reboot contains the following parameters:

Please enter the time to reboot (seconds)

Enter a delay value so that the device will only reboot after the requested delay of time.

“Reboot” button

Press this button to reboot the device. If a delay is specified, it will wait for that amount of

time before rebooting the device.

3.7 Reset

Reset contains only one “Reset to Factory Default” button. Press this button to restore the

configuration for the device back to factory default.

3.8 Status